Once you have pierced the quilt top, it is time to know how to sandwich a quilt. It sounds scary than it actually is.
First of all, you should lay out the back fabric on a surface that is flat like the floor or bed- in a space that is large enough to make the quilt flat. The fabric ought to face down on its right side.
The next layer is known as batting. You will realize that as you work on a larger project, the width of batting may not cover that one of the project.
If you discover that the batting you have does not fit because it is small, simply stitch the batting edges together to create a single form of batting, which is long and wide enough for your project. Bump the batting edges together but do not overlap.
You should be careful as you learn how to sandwich a quilt so that the batting sections do not overlap when you stitch them together since this will cause certain areas of the quilt to be thicker than the rest.
You need to ensure that your batting and backing extends about two inches beyond the top of the quilt.
The sandwich’s top layer makes the top of the quilt. It is placed with the right side facing up.
You are now ready to baste the quilt.
If you have the intention to hand quilt, the best method is pin or thread basting. The idea behind it is to ensure that the quilt layers are secured so that while you are quilting, it is free from tucks and puckers.
For quilting using a sewing machine you can either use basting spray or pins to ensure that the layers are secure. The pins can be easily removed while you are stitching. The basting spray either wears out or washes away with use. However, if your quilt is thread basted as you stitch using the machine, it will be hard to remove the basting thread.
At this stage, the quilt sandwich ought to be secure enough to quilt by hand or by machine. Despite the technique you intend to use, you should ensure that the sandwich is kept firm while you are quilting.
If you are quilting using a machine, the sandwich is rolled towards the middle from both sides. These sides can be pinned or clipped so that they stay in place while you are quilting. It is essential that as you get to know how to sandwich a quilt, you control the sandwich sides to ensure that the fabric in excess does not pull especially on the section being quilted. As quilting progresses through the project, you will unroll and roll the sides, re-pin or re-clip and continue.
If you opt to hand quilt the sandwich, you will be required to ensure that the fabric is kept taut and from your way while you are working on a specific section.
This is done as you use a quilt hoop or frame. There are several kinds of frames that you can choose from; thus what you eventually opt for depends on your personal preference.
Majority of novice quilters opt for lap frames. They are usually less expensive in comparison to the larger frames. They also allow quilters to be in a position to manipulate the projects they have with more ease as they get to learn how to sandwich a quilt.
Related posts: